The Electrolysis of Copper Sulphate :: Papers

The Electrolysis of Copper Sulphate Aim Analyse and value the quantity of Copper (Cu) metal deposited during the electrolysis of Copper Sulphate solution (CuSo4) exploitation Copper electrodes, when certain variables were changed. Results Voltage crosswise Concentration of solution electrode 0.5M 1.0M 2.0M 2 5.0 10.6 19.5 4 10.5 19.8 40.3 6 14.3 26.0 60.2 8 15.2 40.4 80.3 10 15.0 40.2 99.6 12 15.1 40.0 117.0 Analysing/Conclusion The stimulant variables in this experiment are concentration of the solution and the voltage across the electrodes. The outcome is the amount of copper gained (measured in grams) at the electrodes. By analyzing the graph, we after part see the rapid increase of weight gained for the 2.0 molar concentration as the gradient is steeper. Whereas the 1.0 mol and 0.5 mol concentrations increases steadily at a drawn-out rate. This obviously shows that if the voltage increase, the we ight also increases. Hence I can conclude the higher then voltage and concentration, the more copper is produced. The land for this would be because we used electrolysis. This is used to separate metals from their ores and metal compounds. The electrolyte (solution) contains negative and commanding ions. For electrolysis to work there must be the same amount of lordlyly charged ions to negative ions so that the solution is electrically balanced. A solution of metal compounds can only conduct electricity if it is balanced. The negative ions are attracted to the anode (+ve electrode) and the positive ions (protons) are attracted to the cathode (-ve electrode). The electrolyte effect the amount of atoms attracted. This happens at the cathode Cu2+ +2e- =Cu And oxygen is produced at the anode. Increasing the concentration is more affective than increasing the voltage hardly in order to gain more copper, you will need the highest